i'm encoding a video for the castle of illusion run, i've got the quality to be satisfatory with the final video being 150 mb big, but sometimes during playback the image freezes or starts to choke whil the audio continues normally, and then 3 or 4 seconds later the video (now delayed) skips to where the sound currently is (which is where it should be if it werent for the earlier freezing/ delay).
i've tried several things to fix it, some faqs say that the player needs to be set to not use overlaying, and turning it off on windows media player really made the freezing to occur not that often, but it still happens about 6 times during the 19 minutes long movie. the frames that seem to be lost are actually there, if i scroll the video i might get lucky that it wont freeze on the same moment that had previously frozen.
my settings in virtuadub are pretty much the same as in the avi making guide from this site, the difference being that i encoded the audio along with the video all in virtuadub (i didnt use lame or nandub). the audio is set to interleave every 60 frames, using a vbr mp3 encoding.
i've tried doing a single pass encode for the video and 2 pass encoding, but both showed the same problem. a video of 210 mb also had the same problem.
i dont know if it can be fixed, or what is the problem, the quality is good enough, the video would be done processing if it werent for that issue... can aybody help?
PS.: btw, i added the info at start, i cut the 2 seconds of the raw captured video (those 2 seconds had no sound at all) and put 1 second of advertising this site and 1 second of the run statistics, the only thing that was lost on the 2 seconds that were cut is the SEGA logo and black screens.
