Blah, I can't get it to work :( Tried desmume (nothing), no$gba 2.6 and no$gba+no$zoomer, on both of those when i create a new profile I can't seem to start a new game unless I spawn an object on the title screen. But when I do that and try to load a level it gives me a black screen. [/passive-aggressive cry for help]
i'm using no$GBA 2.6 with the FRAM 32kb ram setting for memory
and it works perfectly
i can't make to work with Dsemune tought ( 0.9.4+) (it just give me a blank screen, i had the same but with PoR in a earlier versions ( i think it has something to with the wifi)
@errror : you can wallzip trhought some solid walls with the jetfighter/jet
you spawn the plane "in" the door, if you manage to ride it, you will exit the ride the other side of the wall.
i managed to do this once but can't manage to reproduce the thing
hehe someone is trying to do the hidden dungeon there...
try this cheat code :
030038F0:20
can't remember if it's gameshark or code breaker but the cheat name i gave it was "riddle quest".... just tried it, you have to stay in front of the guy blocking the passage and enable the cheat code, you'll warp behind him, then disable the code and you shall pass...
My question is if I can use some cheat codes to reset some extra things like ingame time.
can't you create a new game on the second slot and with a save on first slot
do the succubus glitch to modify the memory so the second save get the hard mode ?
so a new international crisis is to be expected ?
also there was a law & order on the exact same subject, a russian who owned a pawn chop was buying his customers insurance right before killing them...
hi ktwo, ive seen your deathless run on SDA and it's realy impressive, about the TAS,even tough you lack motivation, why don't you give a shot ? you have a prety advanced knowledge of the game, so it would'nt be "too" hard to optimise the run, also the tools are realy easy to use, and more, the experience could alow you to improve your console runs...
the movie desynched right after getting the axe
so i had to rip the Nico² video to watch it in full screen
the run is amazing, yes vote !
avi version of the nico² :
http://ftpdugeni.free.fr/idee/flaEF.AVI
also can you provide the save file ?
when i did the game, i had a early version of DSemune so, the save didn't work ( just the state save), when i finished the game, i was so pissed to see that i couldn't do the julius mode because of that...
i hope that with your version i will be able.
actualy the moment you use your public ip adress, it will go to the ISP router to make the request
let's say that your server have the public adress and your laptop have a private one ,if your tracert the packet it will be something like that:
laptop>router>isprouter>server
That would be the case if the router was operating normally with the ISP connected to the WAN port, but if it's acting as a switch, it should just forward the data to the port that's connected to the device with the MAC address specified as the destination, regardless of the IP address.
As for the metric, I think you're talking about a different kind of metric. The metric parameter used with the route add command controls how it will select which route to use, it's not the TTL metric.
it still goes thru a ISP equipement when it's not realy needed
as for the ROUTE metric, youre right , they are not talking about the TTL.
hello,
it's a sonic hack if i read correctly, i think that you should first submit the hack to other tasers /users before submiting a TAS, as hacks are imediatly rejected 90% of the times
Try putting the server's IP instead of the router's IP. It should then send data with the server's IP as destination to the server. I couldn't find a way to leave the gateway field blank.
route -p add (Server's IP) mask 255.255.255.255 (Server's IP) if (LAN interface)
The traffic should not go to the ISP if it's sent to the server's MAC address, I think, which should be the case here.
The other route command isn't needed, since the correct route exists by default. The route to the server overrides the default route, since it's metric is 1 (since it wasn't specified).
actualy the moment you use your public ip adress, it will go to the ISP router to make the request
let's say that your server have the public adress and your laptop have a private one ,if your tracert the packet it will be something like that:
laptop>router>isprouter>server
the metric parameter is how much maximum jump the packet can do before selfdestruction, if you set it at 1, the packet will selfdestruct before the isprouter, the default metric is "always" 10 but again, the isp rerouting isn't counted in the "10" jumps
the 0.0.0.0 route is just to make sure that the lan is only used when the computer try to comunicate with the server, as the default 0.0.0.0 route may change when the lan cable is pluged ( i think it change to the fastest answer IE : the lan )
edit : i have a nice utility called NetworkActiveAUTAPF witch is a port forwarder, i use it to access my VM servers thru internet
so if it's only for file transfert, you can redirect all data going for the file transfert port directly to the LAN interface IP (must be a static ip of course)
but i don't know if it will work that way and also, all the data's will transit throught your isp network ( and the router fonction is not used :/)
as for the (ROUTER ADRESS) you will have to change it to your isp gateway
(since the DHCP/GATEWAY roles are done by the isp)
that's mean you have a good thrust into your ISP as all your "internal" trafic will go thru the isp, even your personal ones
Go into the card's properties and select TCP/IPv4 and click on Properties, and select "Use the following IP address", then enter the IP address you want to use for the card. Then go into the command prompt and type:
netsh interface ipv4 show interface
This tells you the interface index of the network card where the cable is connected. Then type:
route -p add (Server's IP) mask 255.255.255.255 (Router's IP) if (Interface index)
If the server's IP changes, you can delete the old route using the following command and then add it again:
route -p delete (Server's IP)
the actual trick would be to totaly rewrite the routing table
basicaly the first route would go via the wireless adapter
route -p ADD 0.0.0.0 mask 255.255.255.255 (router's IP) if (wirless interface)
this will tell to forward everything to the wireless interface
then you add HHS route :
route -p add (Server's IP) mask 255.255.255.255 (Router's IP) if (LAN interface)
so if he ask to go to the server he'll use the LAN
also you should change the server IP adress, the best option for you would be to create a DMZ in the router and to place the server that DMZ
so internaly your router would have a 192.168.x.x. but since it's in the DMZ the router will automaticaly forward any packet to your server and become totaly transparent (no port forwarding needed for P2.....games \o/)
and i don't completly understand how you can get 5 public IP, is it feature from your ISP? if it's the case, then again better use the router as a DHCP server (but the port forwarding will be needed for all the computers that are not in the DMZ) it's a bit fastidious to set up but all your local trafic will stay local (if it use a public adress, it goes all thru the ISP network every time) and you would gain some speed...
it's going so fast that you can't blink without missing a whole stage...
awesome run and easy yes vote.
we should seriously add a epilepsy warning on this one...
hi, you should aks first the mods / users before editing the wiki
sure it could prevent "bad submissions" but in the end the user will STILL have to submit a clear english text and be a be able to understands the critics /idea's made by others , even the tools are in english so it seems kinda pointless....
also the language barrier don't stop "good tassers" from submiting,
the best exemple is HappyLee, when he submited his first mario run, the english was kinda aproximative, and now his text are writen in a perfect english
I liked all the different game styles. I couldn't see any mistakes, so I voted Yes. Must have been a tough maze!
same there, the only bad point is that you didn't kill enough inocent peasants
i mean it's the 'nam
How many Vietnam vets does it take to screw in a light bulb?
You don't know, man. You don't KNOW.
cause you weren't THERE
In that case, you probably shouldn't watch the sequel to this video. :p Some editors tend to overdo on effects and sound bytes, but I find this video adds to the presentation without going overboard.
in that case it's more "Monster kill" than overdo...
THIS is a combo exibition
i'm ok for the cheat code but in the submition text it will have to be specified in big bold characters ( flashing red and making akward sounds would be a plus )
