Editor
Joined: 3/31/2010
Posts: 1466
Location: Not playing Puyo Tetris
Star Fox seems to have a lag frame, every other frame. I know Star Fox has lag, but not this bad. Stunt Race FX seems to run at 50 FPS. Both are confirmed good dumps and U versions.
When TAS does Quake 1, SDA will declare war. The Prince doth arrive he doth please.
Joined: 1/23/2012
Posts: 82
hegyak wrote:
Star Fox seems to have a lag frame, every other frame. I know Star Fox has lag, but not this bad. Stunt Race FX seems to run at 50 FPS. Both are confirmed good dumps and U versions.
What's your CPU?
Editor
Joined: 3/31/2010
Posts: 1466
Location: Not playing Puyo Tetris
Quad Core AMD 2.51 GHz . Radeon 5570. Other SNES games work fine. It's just those two that are odd.
When TAS does Quake 1, SDA will declare war. The Prince doth arrive he doth please.
Editor, Emulator Coder
Joined: 8/7/2008
Posts: 1156
starfox is considering itself lucky if it can run at 30fps. usually (always?) its running worse. you shouldnt be surprised if its got as many lag frames as missed frames.
Editor
Joined: 3/31/2010
Posts: 1466
Location: Not playing Puyo Tetris
zeromus wrote:
starfox is considering itself lucky if it can run at 30fps. usually (always?) its running worse. you shouldnt be surprised if its got as many lag frames as missed frames.
That's true. I know StarFox is a slow @$$ compared to Virtua Racing. Genesis does what Nintendon't.
When TAS does Quake 1, SDA will declare war. The Prince doth arrive he doth please.
Skilled player (1652)
Joined: 11/15/2004
Posts: 2202
Location: Killjoy
Record All in multitrack is not working. The "currently recording player" over laps with the FPS.
Sage advice from a friend of Jim: So put your tinfoil hat back in the closet, open your eyes to the truth, and realize that the government is in fact causing austismal cancer with it's 9/11 fluoride vaccinations of your water supply.
Former player
Joined: 5/4/2005
Posts: 502
Location: Onett, Eagleland
hegyak wrote:
Quad Core AMD 2.51 GHz . Radeon 5570. Other SNES games work fine. It's just those two that are odd.
BSNES emulates all co-processors (SuperFX, Cx4, etc...) at the low level, so games that utilize them are considerably slower than games that don't. That's why.
I think.....therefore I am not Barry Burton
adelikat
He/Him
Emulator Coder, Site Developer, Site Owner, Expert player (3574)
Joined: 11/3/2004
Posts: 4754
Location: Tennessee
DarkKobold wrote:
The "currently recording player" over laps with the FPS.
Just move it to where you would like it from the Config -> Messages dialog
It's hard to look this good. My TAS projects
Editor
Joined: 3/31/2010
Posts: 1466
Location: Not playing Puyo Tetris
Pasky13 wrote:
hegyak wrote:
Quad Core AMD 2.51 GHz . Radeon 5570. Other SNES games work fine. It's just those two that are odd.
BSNES emulates all co-processors (SuperFX, Cx4, etc...) at the low level, so games that utilize them are considerably slower than games that don't. That's why.
Well, Stunt Race FX doesn't lag that hard and it also uses the SuperFX chip. Yoshi's Island also uses the Super FX chip (though, it's a newer one).
When TAS does Quake 1, SDA will declare war. The Prince doth arrive he doth please.
Former player
Joined: 5/4/2005
Posts: 502
Location: Onett, Eagleland
Maybe it's when the chip is in use that they utilize even more cpu usage? Megaman X2 and X3 will get decent frame rates until they use the Cx4 to do their 3D processing I believe.
I think.....therefore I am not Barry Burton
Editor
Joined: 3/10/2010
Posts: 899
Location: Sweden
I've heard that X2 and X3 use the C4 for all their graphics, not just the wireframe stuff, but also plain old 2d sprite stuff. I guess the load really does depend on the amount of stuff the game asks from the chip.
Former player
Joined: 5/4/2005
Posts: 502
Location: Onett, Eagleland
Ah, okay. Yes, maybe it's the load on the chips that causes the huge slowdown, seems logical.
I think.....therefore I am not Barry Burton
Active player (406)
Joined: 3/22/2006
Posts: 708
Pitfall II won't load in Bizhawk
Exception during loadgame: System.InvalidOperationException: mapper not supported: DPC at BizHawk.Atari2600.HardReset() at BizHawk.Atari2600..ctor(GameInfo game, Byte[] rom) at BizHawk.Atari2600.MultiClient.MainForm.LoadRom(String path, Boolean deterministicemulation)
Editor, Experienced player (570)
Joined: 11/8/2010
Posts: 4036
Heisanevilgenius wrote:
Pitfall II won't load in Bizhawk
I don't think the mapper it uses is supported yet.
Player (164)
Joined: 4/14/2012
Posts: 25
Location: Japan
I've come accross defective emulation of graphics in GBC "Dragon Quest III - Soshite Densetsu e... (Japan)" after using a bug to enter debug mode. This game has a serious bug that we can go debug mode. When we use a bugged item called "なし"(nothing), junk data is written in RAM and we can sometimes go debug mode. On real console, the graphics are not broken, though on BizHawk, the graphics of the fields are broken. movie file: http://www.mediafire.com/?63gn1g4p1w5f2c7 (works on Bizhawk v1.1.1b and v1.2.0) http://www.nicovideo.jp/watch/sm19161625 (graphics broken from 5:25) VBA-M makes the same broken graphics too: movie file: http://tasvideos.org/userfiles/info/2162614622808571 The graphics are not broken on real GBC console: http://www.youtube.com/watch?feature=player_detailpage&v=oyjXuMf9nyI#t=594s (he uses GBASP?)
Editor, Emulator Coder, Site Developer
Joined: 5/11/2011
Posts: 1108
Location: Murka
Thanks for the bug report, and for the movie file that reproduces it. Unfortunately, we don't really have a GB emulation guru here. The core is from gambatte, and has only received minor changes in bizhawk. Does this bug also occur in gambatte itself? If so, you might take it up with the author of gambatte. If he makes a change to gambatte proper that fixes it, then we can easily add the change here in bizhawk.
adelikat
He/Him
Emulator Coder, Site Developer, Site Owner, Expert player (3574)
Joined: 11/3/2004
Posts: 4754
Location: Tennessee
Randil wrote:
Hi again, I just opened up a .bkm-move for a GB game in a text editor and noticed that it contained
Force_DMG_Mode False
GBA_In_CGB False
Force_DMG_Mode False
GBA_In_CGB False
repeated 500 times or so... after digging a bit deeper into this, it seems Bizhawk appends this text to the movie header each time you stop playing a movie while in write mode. Sometimes it appends more than one instance of this message, so I think it's worth checking out how the code looks for writing this message to the bkm file.
Sorry but I can not reproduce this. I tried with GB and GBA games. And I used 1.1.1a as well as 1.2.0, and the latest SVN version.
It's hard to look this good. My TAS projects
Skilled player (1827)
Joined: 4/20/2005
Posts: 2161
Location: Norrköping, Sweden
It might have been that I was switching between read-mode and write-mode a lot while recording... perhaps if you try that?
Editor, Emulator Coder, Site Developer
Joined: 5/11/2011
Posts: 1108
Location: Murka
Masterjun wrote:
If I use the Trace Logger in Tetris (NES) it somehow pauses the game by itself (even while movie playback)... there is also something strange going on with the sound after logging...
Will be fixed for next release
Site Admin, Skilled player (1254)
Joined: 4/17/2010
Posts: 11480
Location: Lake Char­gogg­a­gogg­man­chaugg­a­gogg­chau­bun­a­gung­a­maugg
Robocop 3 emulation in BH. Link to video
Warning: When making decisions, I try to collect as much data as possible before actually deciding. I try to abstract away and see the principles behind real world events and people's opinions. I try to generalize them and turn into something clear and reusable. I hate depending on unpredictable and having to make lottery guesses. Any problem can be solved by systems thinking and acting.
Active player (406)
Joined: 3/22/2006
Posts: 708
feos wrote:
Robocop 3 emulation in BH. Link to video
Video of the year. Sharing on Facebook.
Editor, Emulator Coder
Joined: 8/7/2008
Posts: 1156
should have been broken since 19-aug-2012. memory map was accidentally implementing $1xxx reads as PPU register reads instead of internal ram reads, which caused the scroll regs to get glitched. could have been affecting a number of games since that date but accessing variables in that range is not typical behaviour. fixed in r3655
Site Admin, Skilled player (1254)
Joined: 4/17/2010
Posts: 11480
Location: Lake Char­gogg­a­gogg­man­chaugg­a­gogg­chau­bun­a­gung­a­maugg
Thanks. Though latest interim reports it's r3577 in the Help window instead of 3655. http://code.google.com/p/feos-tas/downloads/detail?name=BizHawk.zip
Warning: When making decisions, I try to collect as much data as possible before actually deciding. I try to abstract away and see the principles behind real world events and people's opinions. I try to generalize them and turn into something clear and reusable. I hate depending on unpredictable and having to make lottery guesses. Any problem can be solved by systems thinking and acting.
Editor, Emulator Coder
Joined: 8/7/2008
Posts: 1156
see if it works better now, i changed the revision number tracking batchfile to be more robust
creaothceann
He/Him
Editor
Joined: 4/7/2005
Posts: 1874
Location: Germany
I'm trying to capture an AVI file of the Space Invaders run, but can't get it to record audio. WAV and MKV also record only silence. (Here's my config.ini.) PS: According to 2k6specs.htm the framerate is controlled by the game, so would the one used for official timekeeping (TAS duration = framecount / fps) be NTSC's framerate, i.e. 60000/1001?

1732789085