Experienced Forum User, Published Author, Player
(242)
Joined: 7/3/2021
Posts: 147
Location: Udaipur, Rajasthan, India, God'sBeautifulWorld
Is there any script to put in the ffmpeg custom command?
It's more easy and straight forward in use, hence I would like to know if there is any script for it.
Experienced Forum User, Published Author, Player
(242)
Joined: 7/3/2021
Posts: 147
Location: Udaipur, Rajasthan, India, God'sBeautifulWorld
I was making a TAS of a Saturn game and after opening the TAS Studio, alternate frames were lag frames.
I want to know how to fix this in N64 and Saturn games.
It also happens when I TAS SM64.
When I enabled "Hide Lag Frames", it disturbed the lower rows of the input area and it got wierd.
I tried all the options in it.
Please tell the solution.
Experienced Forum User, Published Author, Player
(242)
Joined: 7/3/2021
Posts: 147
Location: Udaipur, Rajasthan, India, God'sBeautifulWorld
Spikestuff wrote:
Using the demo's input to showcase a quick and dirty convert to demonstrate my point, 10 frames faster on that first level with your input slightly adjusted.
It's so quick and dirty that I didn't fix the hashes.
If you're talking about that little improvement of several frames, it gave me an intense difficulty in 4th and 5th level. That difficulty doesn't give chance to do anything, my used glitches also didn't worked then.
Experienced Forum User, Published Author, Player
(242)
Joined: 7/3/2021
Posts: 147
Location: Udaipur, Rajasthan, India, God'sBeautifulWorld
Spikestuff wrote:
Excuse me for asking, but why is the first level slower than the demo's input by 15 frames?
In every right comparison there shouldn't have been lost time here instead it would've matched-- well a frame of lost time due to what I wrote earlier.
As you said that pressing start on the first frame doesn't loads the later levels, hence I started a frame late and I even tried to paste exact inputs but the situation had changed and became more difficult.
I was unable to improve it anymore
Experienced Forum User, Published Author, Player
(242)
Joined: 7/3/2021
Posts: 147
Location: Udaipur, Rajasthan, India, God'sBeautifulWorld
I recently got into TASing SMB with cheats.
I keep my things organised hence, was arranging all my codes in the cheats section and noticed that I am unable to keep more than 14 cheats at a time.
Why is it so?
I will do something else to keep my codes backup, but I didn't understood the cause of this.
Please reply if this limit is increasable.
Experienced Forum User, Published Author, Player
(242)
Joined: 7/3/2021
Posts: 147
Location: Udaipur, Rajasthan, India, God'sBeautifulWorld
I am very thanked to you for helping me in this situation. You saved my hours of hard work.
Reminder that there are several different backup options already available. You should make use of them.Yes I will enable it from now, thanks for advice.
Experienced Forum User, Published Author, Player
(242)
Joined: 7/3/2021
Posts: 147
Location: Udaipur, Rajasthan, India, God'sBeautifulWorld
If there is an option to auto save, then why do the project doesn't save when there's a light cut???
Even if I save manually and by chance, BizHawk closes automatically, the file doesn't saves and I have to do all the stuff again.
My hours of work was wasted and my file too got corrupted.
Regularly opening and closing TAS Studio to prevent it isn't any kind of solution, I think.
Please reply...
Is this a todo mechanism or a problem with my pc(I don't think because it happens in both Win10 and7, 4GB RAM, i3)
Experienced Forum User, Published Author, Player
(242)
Joined: 7/3/2021
Posts: 147
Location: Udaipur, Rajasthan, India, God'sBeautifulWorld
Bigbass wrote:
MrTASer wrote:
I uploaded an embeddable image on Imgur and copy pasted the link in avatar url space.
It accepted but don't show the image already. I have to preview image on that small icon to view my avatar.
What to do?
Experienced Forum User, Published Author, Player
(242)
Joined: 7/3/2021
Posts: 147
Location: Udaipur, Rajasthan, India, God'sBeautifulWorld
I uploaded an embeddable image on Imgur and copy pasted the link in avatar url space.
It accepted but don't show the image already. I have to preview image on that small icon to view my avatar.
What to do?
Experienced Forum User, Published Author, Player
(242)
Joined: 7/3/2021
Posts: 147
Location: Udaipur, Rajasthan, India, God'sBeautifulWorld
Spikestuff wrote:
Fun fact: The author started the game a frame too early meaning you never get to see this message at the end of the level
I saw this message before TASing it.
When I read, buying it, I felt "ok, it's demo I downloaded, to play full I have to buy it"
Sorry, That was my fault.
Experienced Forum User, Published Author, Player
(242)
Joined: 7/3/2021
Posts: 147
Location: Udaipur, Rajasthan, India, God'sBeautifulWorld
nymx wrote:
I'm curious, but in this situation...you would have to play more than one level for this to satisfy the rules. If there is no end in sight, hence a looping game, you'll have to at least TAS the game until the difficulty no longer increases. The RTA video that you posted, shows a dramatically different level on round 2. This is an indicator that new content still exists and that further inputs are needed to showcase the full content of the game.
I truly wanted to TAS it completely but being a school student, I can't afford purchasing games. Sorry, if this condition isn't accepted here.
Experienced Forum User, Published Author, Player
(242)
Joined: 7/3/2021
Posts: 147
Location: Udaipur, Rajasthan, India, God'sBeautifulWorld
InfoManiac742 wrote:
The run doesn't seem to very interesting or entertaining in my opinion. Additionally, it looks like it's done on the PAL version, but sped up by a factor of 6/5. The https://tasvideos.org/MovieRules additionally state that NTSC is preferred over PAL, unless there is a specific reason to use PAL. If this softlock is only possible on the PAL version, that should be stated in the submission comments. Otherwise, future such movies should be done on the 60 Hz NTSC version.
Yes, this is only done in PAL version because Mario accelerates slightly faster in this version which helps in covering more X position towards right with a backwards jump.
I don't think this setup will be successfull in the NTSC version. All the Speedrun and TASes for this setup are done using the PAL rom.
Experienced Forum User, Published Author, Player
(242)
Joined: 7/3/2021
Posts: 147
Location: Udaipur, Rajasthan, India, God'sBeautifulWorld
Radiant wrote:
Please explain how "SMB in Super Mario AllStars" is meaningfully distinct from the standard SMB on the NES, aside from the graphics. Are there particular glitches or strategies that work on this ROM but not on the NES one?
Its not possible to despawn any enemy like in SMB.
Bullet Bill Glitch at 8-2 is not doable.
1-2 warp zone can be done without scrolling the screen forward.
Not much but these are different from the original. And I submitted it because I've seen TASes of other All-Star titles being published.
Experienced Forum User, Published Author, Player
(242)
Joined: 7/3/2021
Posts: 147
Location: Udaipur, Rajasthan, India, God'sBeautifulWorld
There are a lot of interesting LUAs for fceux like the jetpack and HitBox lua. They are so good to experiment with, but when I thought to TAS with those LUAs in BizHawk, it malfunctioned.
I know that LUAs are meant for changing a specific software's code but will it be possible to open fceux LUAs in BizHawk or make those LUAs apply-able for BizHawk?
Experienced Forum User, Published Author, Player
(242)
Joined: 7/3/2021
Posts: 147
Location: Udaipur, Rajasthan, India, God'sBeautifulWorld
Sigma 7 wrote:
There's already a minus world run. See: https://tasvideos.org/1365M
The other minus world run is slightly faster (after adjusting for FDS loading time), and also qualifies as a complete run.
HappyLee TASed the original NDS Minus World, but I TASed a rom hack in which placing a flagpole at the end of -3 using level editor, the hacker created messy levels. It's not even on FDS, it's a NES rom hack.
Experienced Forum User, Published Author, Player
(242)
Joined: 7/3/2021
Posts: 147
Location: Udaipur, Rajasthan, India, God'sBeautifulWorld
Samsara wrote:
Hi there. Sorry to ask this, but could you please hold off on any further submissions for the time being? The staff have been overloaded with transferring over to the new site, and the Judges in particular have a large backlog of submissions to process because of it, so it'd be wonderful if you could be patient here and refrain from submitting further runs until our workload clears up more. Thank you in advance!
Yes, I agree you.
I will be absolutely be taking a break. Sorry, I didn't knew that problem, hence caused trouble.
Thank You.
Experienced Forum User, Published Author, Player
(242)
Joined: 7/3/2021
Posts: 147
Location: Udaipur, Rajasthan, India, God'sBeautifulWorld
DrD2k9 wrote:
I'm not overly familiar with SMB tasing, but there's an apparent time loss at 2:00 into the encode. Mario bonks into the elevator platform in 4-2. Had you taken a slightly different route prior to that bonk, you wouldn't have been slowed by it.
It was to manipulate Mario's x-position towards right so that I can perform a glitch called wrong Warp. It is necessary for saving time.DrD2k9 wrote:
There is also a brief slowdown in 8-3 around 4:04 in the encode where you slow down to kill a hammer bros.
I slowed because a 1, 3, or 6 in units place of the timer gives fireworks which waste time. I slowed to save several seconds.
Experienced Forum User, Published Author, Player
(242)
Joined: 7/3/2021
Posts: 147
Location: Udaipur, Rajasthan, India, God'sBeautifulWorld
arflech wrote:
I don't know why you showed a video using the version fo Super Mario All-Stars that does not include Super Mario World, even while the submitted movie was made with the version that does include SMW.
Sorry, once I opened this movie in that non smw version and saved, but it was actually made in the smw version.arflech wrote:
I also thought I heard a skidding sound in 1-1 or 4-1; did you slow down to avoid the fireworks?
These levels does not contain any harmful unwanted fireworksarflech wrote:
MrTASer wrote:
Sorry for inconvenience, I've pasted a public video link.
What you probably want is to make the video Unlisted: That way, people searching from YouTube or your channel page will not see it, but you can still embed it and anyone who sees the embedded video can watch it.
