...What I`ve readed on youtube I would need a third party program like DivX to do it anyway(Which newest free version crashes my old laptop).
You should not ever use DivX. You should use x264.
But there is an encoder's guide on the site. Reading through that should get you started to do simple encodes to upload to YouTube.
Yeah..thanks..Takes time for me to learn it..If of course this ancient piece of amilo La 1703
Mobile AMD sempron 3200+
1.6 GHz with 958 mb ram.with
VIA Chrome9 HC IGP can run it(I highly doubt).New PC has been in mind quite some time..But due to budget..I can only afforg hobby hall`s factoey setted junk..I might have to wait..
I cant seem to get the sound working in this game properly again?It crackles..It wasn´t before like it..Im suspecting that save state has something to do with it..I have tried buffers etc,but it only gets worse..Then there is this odd OOOPS!-file that keep appearing on my save folder?What the heck is that?Edited:Oh..Jittery sound=Tm of Snes9x series..The file-Got it..Just havent done any of those things that creates it..
This was a dfficult for me..But it was faster then previous one..There was interesting glitches even though I usually dont like if there are too many glitches..But that just my opinion and this is TAS:ed so I put my opinions aside and watched..It was interesting and fast,and again I learned a couple of things..So I voted Yes!
At the time this came out,I wasn`t interested in this..Played it a while and sold it away..This run was good..Entertaining to watch and maked me want to play this now when Im older..
Thanks..I still dont know what that means(Cant translate)..But who cares.
Thans for the great hack..I had to buy two new joysticks when I first played it through:)
Im sorry..My englih skills again..Sometimes I dont remember how something translates from Finnish and I just wrote my suggestion..Well too loosely?
"Where Newcomers to TAS could have their first full TASmovie published and some advice from more experienced TAS:ers,about which and what they could/should improve..My point is that newbies like me usually dont reach even near the published movies.We usually start as any with savestates and slowdown..Without a clue of the right settings etc..And yes,there is always a microstorage..But often these attemps of tas just are not commented in any way..Those are often seen in forum of that particular game between of chatting amongst more experienced TAS:ers,Talking new hard to pull tricks they have found..And as conversation speeds up..The page leaves 2 then 3,and finally so much back that..It`s forgotten..
Newbie TAS movies forum..Where Newcomers to TAS could have their first full TAS and some advice from more experienced TAS:ers,about which and what they could/should improve..My point is that newbies like me usually dont reach even near the published movies..Or often not even movies in Gruefood section...
IIRC, Saturn's movie was started on an earlier version of Redesign. Does the movie synch even though you see a ROM CRC mismatch warning?
Well some of the longer movie didnt work..But it was not Saturn`s..When I browse at this forum I noticed Saturn had removed a lot of them if not all..
your SMR any% speedrun notes page:
http://tasvideos.org/Moozooh/SMR.html
Which i would hope to be developed more..
Getting HJ boots early did work..But its a small vid..I should try something bigger?
2:Is the sound problem usual when playing(It cracks my ears)It doesn seem to affect the game play though..
3:It might be possible that my video screwed up because there was odd file in movie folder(Called OOOPS!-file)?I didnt find the stop recording on the drop menu..so.well..ahem..
4:What does the IIRC means?
did you ever make saturns bombjump? if you can't use the demorph bombjump in air, how do you think you'll get this done starting from the water?
Youre right about that..Im just a beginner..I dont even know how to get Snes9x video on my empty youtube channell(Very depressing).Started recording on the sram+else clear,set the frequency to 48Khz etc..Ended up having an smv with 1kb!Lenght 0:00 etc..Well at least crc32 matched..he he...What I`ve readed on youtube I would need a third party program like DivX to do it anyway(Which newest free version crashes my old laptop)
I am starting to have doubts also about my ROM what I patched
File: C:\Program Files\snes9x 1.43\Roms\Super Metroid (JU) [!].smc
Name: Super Metroid
Speed: 30/FastROM
ROM Map: LoROM
Type: 02
Kart contents: ROM+RAM+BAT
Header ROM Size: 32Mbits
Calculated ROM Size: 24 Mbits
SRAM size: 8KB (64Kbit)
Actual Checksum: F8DF
Header Checksum: F8DF
Header Checksum Compliment: 0720
Output: NTSC 60Hz
CRC32: D63ED5F8
Licensee: Nintendo
ROM Version: 1.0
Region: Japan
This was without patch.
This is patched with Lips patch taken from zophars page
File: C:\Program Files\snes9x 1.43\Roms\Super Metroid (JU) [!].smc
Name: Metroid: Redesign
Speed: 30/FastROM
ROM Map: LoROM
Type: 02
Kart contents: ROM+RAM+BAT
Header ROM Size: 32Mbits
Calculated ROM Size: 32 Mbits
SRAM size: 8KB (64Kbit)
Actual Checksum: 4322
Header Checksum: 4322
Header Checksum Compliment: BCDD
Output: NTSC 60Hz
CRC32: 520C3EB2
Licensee: Nintendo
ROM Version: 1.0
Region: Japan
Notice!Im not asking where to get roms..Im asking di I have the original ROM or what the checksum or something like that should be,because every movie file I have loaded gives Mismatch and in lower left corner:Not the correct rom loaded..Also the sound is cracking like an old radio..So please answer this..I just want to make something..
gunnargumpertTAS has a good video..Showing frames and which button are used..Only thing I have to figure out is how to slow it down so I could see which button is pressed and for how many frames...
how to slow down in snes rerecording 1.51? as far as i know, the standart is + and -
you can change this in the "Conific" - "Hotkeys" --> Category "Speed"
edit: frameadvance is \ and fastforward is Tab
Well..I actually ment your youtube video..Now i had to take the"beast"out of it shell.Snes9x 1.43..Zsnesw is not used as I checked for many reasons..And all the smv files were made for 1.43..At this forum anyway...I dont know why it gives crc32 mismatch on all the movie files but,as I could see there seems that arent affect on it..I just have different crc..Probably everyone has because of the patch?Not that big of problem?Well..I just have to remap every single hotkey because of the scandinavian keyboard that I have(The layout seems to be different with this)
I got one smv somewhere from this topic,and it showed springball bouncing at fairly good speed.It ended after the pipe,which is above the hidden super missile pack to a crouching and shot to an enemy..I think it was early hijump tset or something..Hard to know for sure..Because of movies always said Mismatch and on the bottom mot right rom loaded,I had to patch about twenty (JU) [!] roms before I though"What the heck" and copied the one I already had in my Zsnesw folder..I think my crc32:520C3EB2 is good as any?Besides I got what I wanted for now,so I can search different possibilities of routes and all...Its good practice and I return for practicing getting boots later..
He went on a mission from God and lost interest in maintaining the site, so he offered to let some other people take care of the site, and then adelikat and Nach stepped up to take it off his hands.
I thought he got an AK-47, went gun crazy in a shopping mall, became dictator of Finland, lost Finland in a gambling bet against Estonia, Estonia gave Finland back to its former owners, and Bisqwit ended up living the same ordinary life that he always had but with 90% less TASVideos?
Yeah..I met him in that mall.I asked him to get rid of the teletubbies running this country...Unfortunatly that didn`t work as planned so we heded to Estonia..Last thing I recall,we were hijacking an Estonian passengership..I dont know what happened afterwards..Im in a lifeboat in middle of nowhere and my laptop`s battery is fading..
You could have also checked the 16–18th pages of this thread where it and other good tricks were shown.
Trust me..I readed all the pages of this topic..But smv files dont like to play in Zsnesw 1.51...Sure I have tried snes9x1.51 which complaint about smv is not compatible use 1.43..So I did that one whined about crc checksum..I have original rom,patch from zophar`s and I patched it with Lunar..It newer had give me problems with zsnesw..
Besides as a beginner,the zsnesw is easier for me to use...
gunnargumpertTAS has a good video..Showing frames and which button are used..Only thing I have to figure out is how to slow it down so I could see which button is pressed and for how many frames...
So it needs only b and dowm button to unmorph in the air...I have been doing it all wrong(using D-up to unmorph)Yideo i most helpful..If I had known about your vid,I would have tried it first..I guess I did not enter the right search words for youtube..now I have to try to break that water surface..
Can somebody tell how specificly to get Hi-jump boots early..I looked the Saturns run and this http://www.youtube.com/watch?v=nvty5rmFhNk&feature=related
which seems easier..I have been trying to get those darn boots over a 3 days now..And im using zsnesw..Please help..Im goin insane..
Disrecard the last one...Here is to Mt Fuji and downhttp://dehacked.2y.net/microstorage.php/info/1415406260/MYSTICAL%20NINJA%20%28USA%29.m64 Should I continue?If you think I should,could somebody check with that memory checker or what is was the speed of coin tossing movement?I mean Is it same as walking,swimming,running or Sasukes flying.There is many of corners in the game that coin toss probably helps when going for the 100%
Well I started to play with this game...Made many mistakes though...But decided to went through the first impact battle anyway...Had some theories that didnt work and well few other mistakes..It kind of hard for a first timer like me to play with joystick and tas input plugin so big amount of restarts are because of those and because I wanted to fool around little with the first impact boss..(and my cat is in heat,so noise distracted my concentration a lot)But if anyone likes to watch a noobie trying to TAS heres the link http://dehacked.2y.net/microstorage.php/info/1772896579/MYSTICAL%20NINJA%20%28USA%29.m64 Just fastforward the awful coin collection..Though its not only thing that went to the woods....I know this game but I made errors a lot....Oh yes,I watched the SDA 100% yesterday;so I know TAS version can be a heck of alot faster and more entertainin..Tomorrow I start this game..Only goal is:Perfection...So if any of the experienced player should look thropugh this playback quality..Add comment is the quality of the playback acceptable..IPlease...OH,an I dont mean how I played but..I know that I screwed up..Alot...I did this in six ours so...
I can start the rom..My issue is lagging Fps dropping to as low as 12 and VI to 34,and of course it repeats that lag in playback..But if you mean that you can fix the lag on mpk movie state then I will begin to planning the fastest 100% TAS route...But when laggin this big,I probly need to go through the wole game frame by frame...
Well Im still interested to trying to TAS this game.If Iget it to work. There are a start of my problems..I posted this link because I started to feel that I was disturbing the board...http://tasvideos.org/forum/viewtopic.php?t=9032&start=40
Im pretty sure its not:
Display adapter 0
Manuf. API index 0
Display name \\.\DISPLAY1
Name NVIDIA GeForce 8600 GT
Revision A2
Codename G84
Technology 80 nm
Memory size 256 MB
Memory type GDDR3
Memory bus width 128 bits
PCI device bus 2 (0x2), device 0 (0x0), function 0 (0x0)
Vendor ID 0x10DE (0x1019)
Model ID 0x0402 (0x1713)
Performance Level 3D Applications
Core clock 600.0 MHz
Shader clock 1350.0 MHz
Memory clock 800.0 MHz
Cause I can play Mario Golf in pj64 with only small flickering..And Goldeney+Perfect Dark in it wthout any lag(for goldeneye and PD its been about 6 months,but same PC)And Ihave recently released geforce update..In PD in that time I had to do something about the core setting(recomplier and those,I dont even know what they do) and few other plugin...I had guidance then I dont know from where or who...But I do remember that Glide Wonder or whatever it was,maked PD sky look like a weird caleidoscope..Maybe it has something to do with my Nvidia control panel..Theres lot of odd sh*t like PhysX on and stuff..Unfortunatly those are in Finnish and probably made by a google translator..Dammit...
Thank you for your effort Aktan,but It did not help...Fps drops on movement(jumping,enemies etc)from 30 to as low as 11,with VI dropping to from 60 to 38 and lower..Processor usage climbs between 24 and 53%.Memory usage about 890MB..Antivirus closed,logitech setpoint, for cordless keyboard+mouse closed,Logiteh gaming software closed,Adobe speedlaunch closed,windows update close..Running processes 30,Tried with affinity to either core.no difference...I remember that first time I installedI used Direct64_07me_sp8 and it didn´t lag at all for firs 15 or 20 minutes.But after that it lagged from the beginning too..
You said it is integrated, so it doesn't have a GPU (it uses your CPU instead). However, it may still be capable of running the game at full speed.
Naw, integrated means the GPU is in the chipset instead. No way it is using CPU as a GPU.
koippis: I used Glide64 (latest here http://glide64.emuxhaven.net/index.php) to capture. Out of all the plugins I've tried, it was the fastest, but it may have a memory leak. Worth a try, I guess.
Worst lag so far....Here I go again...To reinstall...I dont know if it can be made to work on my rig at all...Here are some more detailed specs just in case someone would have something similar...
Processors Number of processors 1
Number of threads 2
Processor 1
Number of cores 2 (max 2)
Name AMD Athlon 64 X2 4050e
Package Socket AM2 (940)
Core Speed 2109.7 MHz
Multiplier x FSB 10.5 x 200.9 MHz
Instructions sets MMX (+), 3DNow! (+), SSE, SSE2, SSE3, x86-64, AMD-V
Chipset
Northbridge NVIDIA MCP61 rev. A3
Southbridge NVIDIA MCP61 rev. A2
Graphic Interface PCI-Express
Memory Type DDR2
Memory Size 2048 MBytes
Channels Dual
Module format Regular UDIMM
Manufacturer (ID) Kingston (7F98000000000000)
Size 1024 MBytes
Max bandwidth PC2-5300 (333 MHz)
Number of banks 2
Data width 64 bits
Mainboard Model ALiveNF6G-GLAN
Hardware monitor AMD Athlon 64 X2 4050e
Temperature 0 34°C (92°F) [0xF6] (Core #0)
Temperature 1 38°C (100°F) [0x108] (Core #1)
Hardware monitor NVIDIA GeForce 8600 GT
Temperature 0 60°C (139°F) (GPU Core)
VGA Controller
DMI BIOS
vendor American Megatrends Inc.
version P1.00
date 11/16/2007
Graphic APIs
-------------------------------------------------------------------------
API NVIDIA NVAPI
API NVIDIA I/O
Display Adapters
-------------------------------------------------------------------------
Display adapter 0
Manuf. API index 0
Display name \\.\DISPLAY1
Name NVIDIA GeForce 8600 GT
Revision A2
Codename G84
Technology 80 nm
Memory size 256 MB
Memory type GDDR3
Memory bus width 128 bits
PCI device bus 2 (0x2), device 0 (0x0), function 0 (0x0)
Vendor ID 0x10DE (0x1019)
Model ID 0x0402 (0x1713)
Performance Level 3D Applications
Core clock 600.0 MHz
Shader clock 1350.0 MHz
Memory clock 800.0 MHz
Windows Version Microsoft Windows XP Home Edition Service Pack 3 (Build 2600)
DirectX Version 9.0c
Monitor: Plug and Play -BenqFP93G
Monitor Max Res: 1600,1200
Driver Name: nv4_disp.dll
Driver Version: 6.14.0011.8250 (English)
Sound Devices
Description: Realtek HD Audio output
Default Sound Playback: Yes
Default Voice Playback: Yes
Manufacturer ID: 1
Product ID: 100
Type: WDM
Driver Name: RtkHDAud.sys
Driver Version: 5.10.0000.5506 (English)
Driver Attributes: Final Retail
Sorry for the long description,but Im tired of messing up my pc over and over again....
