You'd just have to start from SaveRAM after doing your test menu changes. Do File > Movie > Record Movie... then pick the "from SaveRAM" start option, then open TAStudio.
Excellent, after following these last steps, it started without problems or errors, with the difficulty changed and all the changes saved, thank you very much. Now to create TAS as if there were no tomorrow.
Edit: I think this will not be an acceptable submission since I am starting from a Sram, right ?
It's just game setup, not continuing after some prior completion. And there's no other way to do it right now anyway.
Warning: When making decisions, I try to collect as much data as possible before actually deciding. I try to abstract away and see the principles behind real world events and people's opinions. I try to generalize them and turn into something clear and reusable. I hate depending on unpredictable and having to make lottery guesses. Any problem can be solved by systems thinking and acting.
Is it possible to load MAME builtins in MAMEHawk, main examples being TTL games like Pong and Breakout? Because I find the idea of TAS submissions that have an empty or N/A ROM field greatly amusing
I don't understand.
There are drivers in MAME, such as Pong and Breakout, that do not require any ROMsets in order to run- you just use MAMEUI or the commandline to launch the game directly, ie, 'mame pong', and it just works. BizHawk, however, naturally expects one to open a ROM in order to want to play a game- is there any way to get around this?
There are drivers in MAME, such as Pong and Breakout, that do not require any ROMsets in order to run- you just use MAMEUI or the commandline to launch the game directly, ie, 'mame pong', and it just works. BizHawk, however, naturally expects one to open a ROM in order to want to play a game- is there any way to get around this?
Didn't know about this. What happens if you give it an empty archive named pong?
Warning: When making decisions, I try to collect as much data as possible before actually deciding. I try to abstract away and see the principles behind real world events and people's opinions. I try to generalize them and turn into something clear and reusable. I hate depending on unpredictable and having to make lottery guesses. Any problem can be solved by systems thinking and acting.
There are drivers in MAME, such as Pong and Breakout, that do not require any ROMsets in order to run- you just use MAMEUI or the commandline to launch the game directly, ie, 'mame pong', and it just works. BizHawk, however, naturally expects one to open a ROM in order to want to play a game- is there any way to get around this?
Didn't know about this. What happens if you give it an empty archive named pong?
It just throws the exception below, then asks me to choose a file from the archive (like when you open a MAME ROMset without having the required other sets bundled).
System.ArgumentOutOfRangeException: InvalidArgument=Value of '0' is not valid for 'index'.
Parameter name: index
at System.Windows.Forms.ListView.ListViewItemCollection.get_Item(Int32 index)
at BizHawk.Client.EmuHawk.ArchiveChooser.ArchiveChooser_Load(Object sender, EventArgs e)
at System.Windows.Forms.Form.OnLoad(EventArgs e)
at System.Windows.Forms.Form.OnCreateControl()
at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
at System.Windows.Forms.Control.CreateControl()
at System.Windows.Forms.Control.WmShowWindow(Message& m)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.Form.WmShowWindow(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
Robotron 2084 displays the (!) sign on several inputs, mainly the joystick inputs that are used for moving and shooting.
[14:15] <feos> WinDOES what DOSn't
12:33:44 PM <Mothrayas> "I got an oof with my game!"
Mothrayas Today at 12:22: <Colin> thank you for supporting noble causes such as my feet
MemoryTAS Today at 11:55 AM: you wouldn't know beauty if it slapped you in the face with a giant fish
[Today at 4:51 PM] Mothrayas: although if you like your own tweets that's the online equivalent of sniffing your own farts and probably tells a lot about you as a person
MemoryTAS Today at 7:01 PM: But I exert big staff energy honestly lol
Samsara Today at 1:20 PM: wouldn't ACE in a real life TAS just stand for Actually Cease Existing
For Rampart (both the Joystick and Trackball version), the service button simply acts like a coin button. Both the coin buttons also act like a coin button. Service mode can still be activated via the Arcade settings in bizhawk, but there will be no way to exit it when the game is powered on. No idea if this applies to other games or just Rampart.
This was done on the bizhawk dev build posted like 20 hours ago as of posting this (devbuild_0cbc65ba if it means anything).
EDIT: I hadn't looked until now, but this problem is mentioned earlier in the thread, with a slight solution.
Warning: When making decisions, I try to collect as much data as possible before actually deciding. I try to abstract away and see the principles behind real world events and people's opinions. I try to generalize them and turn into something clear and reusable. I hate depending on unpredictable and having to make lottery guesses. Any problem can be solved by systems thinking and acting.
Robotron 2084 displays the (!) sign on several inputs, mainly the joystick inputs that are used for moving and shooting.
Fixed.
Warning: When making decisions, I try to collect as much data as possible before actually deciding. I try to abstract away and see the principles behind real world events and people's opinions. I try to generalize them and turn into something clear and reusable. I hate depending on unpredictable and having to make lottery guesses. Any problem can be solved by systems thinking and acting.
When I try to run the Killer Instinct game it freezes on this screen.
Does anyone know a way to solve it?
Note: I have the correct files, I can open the game in the current MAME emulator, but not in Bizhawk.
Killer Instinct 2 opens normally in Bizhawk.
What does the questionmark icon say when you click it (bottom left)?
Warning: When making decisions, I try to collect as much data as possible before actually deciding. I try to abstract away and see the principles behind real world events and people's opinions. I try to generalize them and turn into something clear and reusable. I hate depending on unpredictable and having to make lottery guesses. Any problem can be solved by systems thinking and acting.
When I try to run the Killer Instinct game it freezes on this screen.
Does anyone know a way to solve it?
Note: I have the correct files, I can open the game in the current MAME emulator, but not in Bizhawk.
Killer Instinct 2 opens normally in Bizhawk.
I had the same result with Killer Instinct working in MAME but not in MAMEHawk, but still worth trying to get working since it may just be my system (which seems to be dying).
Killer Instinct 2 would crash for me after the first battle in MAMEHawk. Not sure of behavior of Killer Instinct 2 in MAME.
Maybe selecting different BIOS settings could work. Arcade (in Menu) -> MAME Settings -> BIOS. Make sure you have both from the same version number from MAME. In the multi disk loader make sure you have the game romset listed first, then the CHD file.
I had the same result with Killer Instinct working in MAME but not in MAMEHawk, but still worth trying to get working since it may just be my system (which seems to be dying).
Killer Instinct 2 would crash for me after the first battle in MAMEHawk. Not sure of behavior of Killer Instinct 2 in MAME.
Maybe selecting different BIOS settings could work. Arcade (in Menu) -> MAME Settings -> BIOS. Make sure you have both from the same version number from MAME. In the multi disk loader make sure you have the game romset listed first, then the CHD file.
I've tried this before, but it doesn't work either.
EDIT: I hadn't looked until now, but this problem is mentioned earlier in the thread, with a slight solution.
Does anyone know a way to solve it?
Note: I have the correct files, I can open the game in the current MAME emulator, but not in Bizhawk.
Killer Instinct 2 opens normally in Bizhawk.
