1 2
67 68 69
84 85
Posted: 1/19/2018 11:44 AM
Quote
ThunderAxe31
Any
Editor, Reviewer, Skilled player (1353)
Joined: 9/12/2016
Posts: 1646
Location: Italy
Arcade TAS of 2023 Homebrew TAS of 2023 PSX TASer of 2022 Gameboy TASer of 2017
coconou wrote:
Hello, i use Bizhawk 2.2.1 and with my snes roms the sounds jump approximately every 15 frames, i don't find a solution so i would ask you if anyone has a fix. Thank you for your help.
ROM names? Core used?
my personal page - my YouTube channel - my GitHub - my Discord: thunderaxe31 <Masterjun> if you look at the "NES" in a weird angle, it actually clearly says "GBA"
Posted: 1/19/2018 12:05 PM
Quote
coconou
Joined: 11/21/2012
Posts: 53
Location: France
many roms, Secret of Mana, Seiken Densetsu 3, The Smurfs (E)... For TASing i use BSNES.
"Si le mal existe en ce monde, il se cache dans le cœur des hommes." "If there is evil in this world, it lurks in the hearts of man." Edward D. Morrison - Tales of Phantasia
Posted: 1/23/2018 10:36 PM
Quote
MESHUGGAH
Other
Skilled player (1917)
Joined: 11/14/2009
Posts: 1353
Location: 𝔐𝔞𝔤𝑦𝔞𝔯
NES TASer of 2013 NES TAS of 2013 NES TAS of 2012 NES TAS of 2011
BizHawk 2.2.1 no gameboy firmwares crash: 1. Open a GB ROM (drag and drop) 2. Set "use BIOS" to true and place GB Bios in firmwares 3. Open a GB ROM (drag and drop) 4. Open a GBC ROM (drag and drop) Using the above steps it should always crash. After writing this post (while doing these steps), GB ROM doesn't have BIOS however it says "True" in bold letters. This also works revers (GBC ROM, place GBC BIOS, GBC rom, GB ROM)
PhD in TASing 🎓 speedrun enthusiast ❤🚷🔥 white hat hacker ▓ black box tester ░ censorships and rules...
Posted: 1/23/2018 11:20 PM
Quote
Alyosha
He/Him
Editor, Emulator Coder, Expert player (3810)
Joined: 11/30/2014
Posts: 2828
Location: US
GBA TASer of 2023 Homebrew TAS of 2023 Gameboy TASer of 2022 NES TASer of 2015
MESHUGGAH wrote:
BizHawk 2.2.1 no gameboy firmwares crash: 1. Open a GB ROM (drag and drop) 2. Set "use BIOS" to true and place GB Bios in firmwares 3. Open a GB ROM (drag and drop) 4. Open a GBC ROM (drag and drop) Using the above steps it should always crash. After writing this post (while doing these steps), GB ROM doesn't have BIOS however it says "True" in bold letters. This also works revers (GBC ROM, place GBC BIOS, GBC rom, GB ROM)
These crashes have since been fixed and will roll out with 2.2.2. Try the dev build if you want to test it out.
Posted: 1/24/2018 8:55 AM
Quote
MESHUGGAH
Other
Skilled player (1917)
Joined: 11/14/2009
Posts: 1353
Location: 𝔐𝔞𝔤𝑦𝔞𝔯
NES TASer of 2013 NES TAS of 2013 NES TAS of 2012 NES TAS of 2011
Dev build fixes this, thanks
PhD in TASing 🎓 speedrun enthusiast ❤🚷🔥 white hat hacker ▓ black box tester ░ censorships and rules...
Posted: 1/24/2018 3:39 PM
Quote
MESHUGGAH
Other
Skilled player (1917)
Joined: 11/14/2009
Posts: 1353
Location: 𝔐𝔞𝔤𝑦𝔞𝔯
NES TASer of 2013 NES TAS of 2013 NES TAS of 2012 NES TAS of 2011
Bizhawk 2.2.1 Gambette Cheats crash 1. Open GB ROM 2. Add a cheat using the Cheats tool 3. Save a state 4. Load that state 5. Press CTRL+R for crash Was trying to check some stuffs in Super Mario Land to generate lag frames with the Cheats tool. Don't know if it's only Gambette issue (tried A7800, no crash)
PhD in TASing 🎓 speedrun enthusiast ❤🚷🔥 white hat hacker ▓ black box tester ░ censorships and rules...
Posted: 1/26/2018 7:40 PM
Quote
Alyosha
He/Him
Editor, Emulator Coder, Expert player (3810)
Joined: 11/30/2014
Posts: 2828
Location: US
GBA TASer of 2023 Homebrew TAS of 2023 Gameboy TASer of 2022 NES TASer of 2015
MESHUGGAH wrote:
Bizhawk 2.2.1 Gambette Cheats crash 1. Open GB ROM 2. Add a cheat using the Cheats tool 3. Save a state 4. Load that state 5. Press CTRL+R for crash Was trying to check some stuffs in Super Mario Land to generate lag frames with the Cheats tool. Don't know if it's only Gambette issue (tried A7800, no crash)
Can't reproduce on the dev build, seems to work. (Anything Gambatte related, just use the dev build for, many things have changed for it since 2.2.1)
Posted: 1/27/2018 2:49 AM
Quote
ruadath
Active player (261)
Joined: 12/13/2016
Posts: 352
Bizhawk 2.2.1 mGBA RAM watch/TAStudio crash 1. open GBA rom 2. open RAM watch and load watch file 3. open TASstudio and load TAS 4. crash crash may be dependent of watch file containing addresses in one or both of IWRAM and EWRAM
Posted: 1/30/2018 6:51 PM
Post subject: Old bizhawk movies don't work with newer bizhawk versions
Quote
Morilli
He/Him
Emulator Coder
Joined: 1/30/2018
Posts: 5
Location: Germany
I am not entirely sure if this is considered a bug or not, but in any case I'm posting it here. I have a few older .bk2 files from bizhawk version down to 1.11.6. I noticed some (not all) cannot be opened with the newest bizhawk version and give the error "Internal savestate error". The movies work perfectly fine using the bizhawk version they were made in, but not in the newest. It could very well be a mistake from my side, if so, please tell me ^^
Posted: 1/30/2018 7:14 PM
Quote
feos
Site Admin, Skilled player (1251)
Joined: 4/17/2010
Posts: 11475
Location: Lake Char­gogg­a­gogg­man­chaugg­a­gogg­chau­bun­a­gung­a­maugg
NES TAS of 2011
Are you trying to open tastudio projects instead of simple movies? If so, open them with 7zip and remove Greenzone. Or simply export to bk2 and it should work in newer versions.
Warning: When making decisions, I try to collect as much data as possible before actually deciding. I try to abstract away and see the principles behind real world events and people's opinions. I try to generalize them and turn into something clear and reusable. I hate depending on unpredictable and having to make lottery guesses. Any problem can be solved by systems thinking and acting.
Posted: 1/30/2018 7:26 PM
Quote
Morilli
He/Him
Emulator Coder
Joined: 1/30/2018
Posts: 5
Location: Germany
No, I am trying to open .bk2 files. Here's the original message. https://imgur.com/a/kgS7R
Posted: 1/30/2018 7:27 PM
Quote
feos
Site Admin, Skilled player (1251)
Joined: 4/17/2010
Posts: 11475
Location: Lake Char­gogg­a­gogg­man­chaugg­a­gogg­chau­bun­a­gung­a­maugg
NES TAS of 2011
Upload the movie somewhere.
Warning: When making decisions, I try to collect as much data as possible before actually deciding. I try to abstract away and see the principles behind real world events and people's opinions. I try to generalize them and turn into something clear and reusable. I hate depending on unpredictable and having to make lottery guesses. Any problem can be solved by systems thinking and acting.
Posted: 1/30/2018 8:03 PM
Quote
Morilli
He/Him
Emulator Coder
Joined: 1/30/2018
Posts: 5
Location: Germany
https://drive.google.com/open?id=1ommBouz6WW2_UflSGgETaz6CanC3NGmN hope that works
Posted: 1/30/2018 8:11 PM
Quote
feos
Site Admin, Skilled player (1251)
Joined: 4/17/2010
Posts: 11475
Location: Lake Char­gogg­a­gogg­man­chaugg­a­gogg­chau­bun­a­gung­a­maugg
NES TAS of 2011
Movie header wrote:
StartsFromSavestate True
You're screwed.
Warning: When making decisions, I try to collect as much data as possible before actually deciding. I try to abstract away and see the principles behind real world events and people's opinions. I try to generalize them and turn into something clear and reusable. I hate depending on unpredictable and having to make lottery guesses. Any problem can be solved by systems thinking and acting.
Posted: 1/30/2018 8:30 PM
Quote
Morilli
He/Him
Emulator Coder
Joined: 1/30/2018
Posts: 5
Location: Germany
But it's normal that movies can start from a savestate... what exactly is the problem there? If it works in older bizhawk versions, it can't be cause of a missing file or state or something...
Posted: 1/30/2018 8:31 PM
Quote
feos
Site Admin, Skilled player (1251)
Joined: 4/17/2010
Posts: 11475
Location: Lake Char­gogg­a­gogg­man­chaugg­a­gogg­chau­bun­a­gung­a­maugg
NES TAS of 2011
If savestate format changes over versions, you won't be able to get it to work on them. The only thing you can do is regenerate that savestate on a new version and substitute it in tour movie.
Warning: When making decisions, I try to collect as much data as possible before actually deciding. I try to abstract away and see the principles behind real world events and people's opinions. I try to generalize them and turn into something clear and reusable. I hate depending on unpredictable and having to make lottery guesses. Any problem can be solved by systems thinking and acting.
Posted: 1/30/2018 8:33 PM
Quote
Morilli
He/Him
Emulator Coder
Joined: 1/30/2018
Posts: 5
Location: Germany
Oh so that's the issue, I assume there is no direct way of transforming an old savestate in a one that works with new bizhawk versions?
Posted: 1/30/2018 8:36 PM
Quote
feos
Site Admin, Skilled player (1251)
Joined: 4/17/2010
Posts: 11475
Location: Lake Char­gogg­a­gogg­man­chaugg­a­gogg­chau­bun­a­gung­a­maugg
NES TAS of 2011
You can't transform the savestate, it's completely different. You need to make a movie that reaches the same point your savestate is on, make a new savestate there, and put it into your movie. The file is called Core.bin. Otherwise, starting a movie from a savestate is usually a bad idea, especially if you want to submit it here. Even even if your fix works, there's no guarantee that the movie will sync on the new version.
Warning: When making decisions, I try to collect as much data as possible before actually deciding. I try to abstract away and see the principles behind real world events and people's opinions. I try to generalize them and turn into something clear and reusable. I hate depending on unpredictable and having to make lottery guesses. Any problem can be solved by systems thinking and acting.
Posted: 2/6/2018 2:07 PM
Quote
Koh1fds
Player (171)
Joined: 7/1/2016
Posts: 263
In BizHawk-2.2.1 and fresh developers build. I go to: File -> Avi / Wav -> Config and Record AVI/WAV and i select "AVI writer" or something When i close that window emulator crashes. "application stop working" Everything works perfectly in BizHawk-1.11.6
Posted: 2/6/2018 3:02 PM
Quote
feos
Site Admin, Skilled player (1251)
Joined: 4/17/2010
Posts: 11475
Location: Lake Char­gogg­a­gogg­man­chaugg­a­gogg­chau­bun­a­gung­a­maugg
NES TAS of 2011
I'm dumping avi fine with 2.2.1. Try removing your config?
Warning: When making decisions, I try to collect as much data as possible before actually deciding. I try to abstract away and see the principles behind real world events and people's opinions. I try to generalize them and turn into something clear and reusable. I hate depending on unpredictable and having to make lottery guesses. Any problem can be solved by systems thinking and acting.
Posted: 2/8/2018 4:31 AM
Quote
cleartonic
Joined: 2/18/2014
Posts: 6
I believe PXM converter does not work properly in Bizhawk version 2.2.1. Steps taken: Downloaded .pxm file (tasvideos.org/2626S.html) Loaded .cue into Bizhawk for game File -> Movie -> Import Movies... Loaded .pxm file, .bk2 was created Opened TAStudio, loaded .bk2 I then opened the .pxm file in TAS Movie Editor and compared to what was in TAStudio (the newly created .bk2 file) The below album shows the discrepancies https://imgur.com/a/EMXpO I don't know much about this conversion process but I attempted to find any semblance of a pattern among the two files- I didn't find any
Posted: 2/8/2018 2:20 PM
Quote
feos
Site Admin, Skilled player (1251)
Joined: 4/17/2010
Posts: 11475
Location: Lake Char­gogg­a­gogg­man­chaugg­a­gogg­chau­bun­a­gung­a­maugg
NES TAS of 2011
cleartonic, please post an issue on bizhawk github. It will get lost here.
Warning: When making decisions, I try to collect as much data as possible before actually deciding. I try to abstract away and see the principles behind real world events and people's opinions. I try to generalize them and turn into something clear and reusable. I hate depending on unpredictable and having to make lottery guesses. Any problem can be solved by systems thinking and acting.
Posted: 2/12/2018 9:27 AM
Quote
Augusto
He/Him
Joined: 11/18/2014
Posts: 37
Using here the latest 2.2.1. A7800Hawk Commando TIA sound volume is much high than Pokey PicoDrive Some sound channels are extremely much more high than others channels. Start Mortal Kombat 2 ... voices are much high and music is much low. Have games that run in 50 HZ even being USA version. MK2 is a example. Mupen64plus Crashing when start any game. Tested selecting all renderers and has the same result. Windows 10 64 - 4 GB RAM - Geforce GT 640 latest driver.
Posted: 2/14/2018 6:38 AM
Quote
MarbleousDave
He/Him
Player (13)
Joined: 9/12/2009
Posts: 1559
I was putting in cheat codes like I normally do. When I go to load them, some of them are gone. This is a problematic bug that needs to be fixed pronto. Put in code 1 without symbols in name, code 2 with many symbols in name, code 3 without symbols in name, save, re-open, is there a code or 2 missing? The Always Load Cheats is problematic. It sometimes deletes cheats and messes up the compare values.
Posted: 2/15/2018 10:49 AM
Quote
MESHUGGAH
Other
Skilled player (1917)
Joined: 11/14/2009
Posts: 1353
Location: 𝔐𝔞𝔤𝑦𝔞𝔯
NES TASer of 2013 NES TAS of 2013 NES TAS of 2012 NES TAS of 2011
BizHawk 2.2.1 1. Colecovision TMS video mode 1, Gulkave and Pit Stop System.Exception: TMS video mode 1! please tell vecna which game uses this! at BizHawk.Emulation.Cores.ColecoVision.TMS9918A.CheckVideoMode() at BizHawk.Emulation.Cores.ColecoVision.TMS9918A.WriteRegister(Int32 reg, Byte data) at BizHawk.Emulation.Cores.ColecoVision.TMS9918A.WriteVdpControl(Byte value) at BizHawk.Emulation.Cores.Components.Z80A.Z80A.ExecuteOne() at BizHawk.Emulation.Cores.ColecoVision.TMS9918A.ExecuteFrame(Boolean Int_pending) at BizHawk.Emulation.Cores.ColecoVision.ColecoVision.FrameAdvance(IController controller, Boolean render, Boolean renderSound) at BizHawk.Client.EmuHawk.MainForm.StepRunLoop_Core(Boolean force) at BizHawk.Client.EmuHawk.MainForm.ProgramRunLoop() at BizHawk.Client.EmuHawk.Program.SubMain(String[] args) 2. Intellivision The Executive ROM HLT System.ArgumentException: HLT is an unexpected behavior; Intellivision should run so long as the power is on. at BizHawk.Emulation.Cores.Components.CP1610.CP1610.Execute() at BizHawk.Emulation.Cores.Intellivision.Intellivision.FrameAdvance(IController controller, Boolean render, Boolean rendersound) at BizHawk.Client.EmuHawk.MainForm.StepRunLoop_Core(Boolean force) at BizHawk.Client.EmuHawk.MainForm.ProgramRunLoop() at BizHawk.Client.EmuHawk.Program.SubMain(String[] args)
PhD in TASing 🎓 speedrun enthusiast ❤🚷🔥 white hat hacker ▓ black box tester ░ censorships and rules...
1 2
67 68 69
84 85