Emulator details

  • Emulator: PCSX-RR v0.0.9
  • Options → CPU → Put the check in "Resident Evil 2/3 Fix"
(If you don't put the check in the fix, music will become too fast.)
Plugins
  • GPU:TAS Soft Graphics Plugin 0.1
  • SPU:TAS Sound Plugin 0.2 (Movie sync mode)
  • Bios:Sony PlayStation BIOS (U)(v4.1)

Game objectives

  • Aims for fastest time
  • Recorded from Power-On
  • Manipulates luck
  • Genre: RPG

About the game

SaGa Frontier is a RPG by Square, released in Japan on July 11, 1997. The game was later published by Sony Computer Entertainment in North America(SCEA) on March 25, 1998. It is the seventh game in the SaGa series and the first to be released on the PlayStation.
The plot of SaGa Frontier take place a science fiction/fantasy setting called the Regions, a group of worlds with varying degrees of culture, unique races, technology, and magic. The game allows the player to follow the exploits of one of seven protagonists, each with his or her own storyline and goal. The game's Free Scenario System offers a large amount of non-linear gameplay, allowing the player to freely travel between many of the Regions, interact with other characters, and take part in turn-based combat.If certain conditions are met within the battle, party members on either side can create combination attacks for added damage.

About the run

I beat the chapter of Lute

Route

Yorkland → Manhattan → Koorong → Shingrow → Koorong → Scrap → Koorong → Devin → Shrike → Koorong → Owmi → Nelson → Mondo Base

Shingrow

Obtain 'HyperScale'.

Scrap

Riki, Mei-ling and T260 join the party.
Obtain some equipment in the Junk Store.
Infinite Items in Scrap Junk Store
Go to the junk store in Scrap and agree to pay 300 credits to search for 3 items. After doing this, talk to the owners again and pick Selling, then go to the bottom selection 'Hyperion Bazooka' and hit circle. Then hit cancel and go into the room with the junk, you'll be able to get 7 items instead of 3. Moreover, the obtained item changes by credit on hand. After picking 7 items, talk to the owners agian, hit selling, highlight circle on 'Hyperion Bazooka' and hit circle. You can do this as many times as you like.
Actual procedure
Sell 'HyperScale' → Pay 300 credits → Sell 'RepairKit' → Highlight circle on 'Hyperion Bazooka' and hit circle
Obtain the following equipment.
CyberSuit×3 Thunderbolt×2 MirrorGlass×2 LethalGun×4 ExcelShield×3

Devin

Receive 4 pebbles.
Buy 'VictoryRune' for Mei-ling.

Shrike

Roufas and EngineerCar join the party.

Owmi

talk with the Capt.Hamilton.

Mondo Base

Change the formation and equipment. (Bold-faced type = Changed point)
MemberEquip1Equip2Equip3Equip4Equip5Equip6Equip7Equip8
T260Armor
Vest
Armor
Vest
Nakajima
Board2
ThunderboltThunderboltLaser
Knife
Samurai
Sword
Mec
Body
EngineerCarLethal
Gun
Eagle
Gun
Mirror
Glass
Mirror
Glass
Laser
Scope
Machine
Vulcan
Pepair
Pack
Mini
Plant
Capt.HamiltonLethal
Gun
Lethal
Gun
Osc-
Sword
Excel
Shield
---Cyber
Suit
RoufasLethal
Gun
AGUNI-
SSP
Excel
Shield
----Cyber
Suit
Mei-ling--Excel
Shield
AGUNI-
CP1
Cyber
Suit
---
To obtain some techniques and items, I fight against 'Giant' twice.

1st

VS Giant (HP 10552)

The 1st turn:
Defense(Roufas),
Thunderbolt(T260)+Crosshair(EngineerCar),
SunRay(Mei-ling)+SharpShot(Captain)
The 2nd turn:
Same as the pre-turn.
The 3rd turn:
Thunderbolt(T260)+Crosshair(EngineerCar),
AnyGun(Captain, Roufas & Mei-ling)
After the battle:
Captain: Learns 'CrossShot',
Roufas and Meiling: Learn 'Twogun'
Obtain 'PowerBelt'.

Captain: Put on 'PowerBelt'. Add 'CrossShot' to the Equip Ability

2nd

VS Giant (HP 10552)

The 1st turn:
Thunderbolt(T260)+Crosshair(EngineerCar)+CrossShot(Captain),
Defense(Roufas and Meiling)
The 2nd turn:
Thunderbolt(T260)+Crosshair(EngineerCar),
AnyGun(Captain, Roufas and Mei-ling)
After the battle:
Roufas and Meiling: Learn 'Twogun'
Obtain 'PowerBelt'. 

Change the equipment.(Bold-faced type = Changed point)
MemberEquip1Equip2Equip3Equip4Equip5Equip6Equip7Equip8
T260Armor
Vest
Armor
Vest
Nakajima
Board2
ThunderboltThunderbolt--Mec
Body
EngineerCar--Mirror
Glass
Mirror
Glass
Laser
Scope
Machine
Vulcan
Pepair
Pack
Mini
Plant
Capt.HamiltonLethal
Gun
Lethal
Gun
Osc-
Sword
Excel
Shield
--Power
Belt
Cyber
Suit
RoufasLethal
Gun
AGUNI-
SSP
Excel
Shield
---Power
Belt
Cyber
Suit
Mei-lingLethal
Gun
-Excel
Shield
AGUNI-
CP1
Cyber
Suit
---
Roufas: Add 'CrossShot & Twogun' to the Equip Ability.
Meiling: Add 'CrossShot, Twogun & VictoryRune' to the Equip Ability.

VS Spriggan

Spriggan shifts to the next form when its HP becomes below the half. (Excluding 'Tamashii')

Spriggan 'Kyoten' (HP 35000)

The 1st turn:
VictoryRune(Mei-ling)→Roufas,
Thunderbolt(T260)+Crosshair(EngineerCar)
 +CrossShot(Roufas)+CrossShot(Captain)

Spriggan 'Douchi' (HP 35000)

The 2nd turn:
VictoryRune(Mei-ling)→Captain,
Thunderbolt(T260)+Crosshair(EngineerCar)
 +CrossShot(Captain)+CrossShot(Roufas)

Spriggan 'Iryoku' (HP 25000)

The 3rd turn:
Defense(EngineerCar),
VictoryRune(Mei-ling)→EngineerCar,
Thunderbolt(T260)+CrossShot(Roufas)+CrossShot(Captain)

Spriggan 'Choshin' (HP 55000)

The 4th turn:
Thunderbolt(T260)+CrossShot(Meiling)+Crosshair(EngineerCar)
 +CrossShot(Captain)+CrossShot(Roufas)
The 5th turn:
Thunderbolt(T260)+CrossShot(Captain)+Crosshair(EngineerCar)
 +CrossShot(Roufas)+CrossShot(Mei-ling)

Spriggan 'Tamasii' (succeeding HP of 'Choshin')

The 6th turn:
Thunderbolt(T260)+CrossShot(Captain)+CrossShot(Roufas)
THE END

Movie of this run
Reference
Saga Frontier (Blue) (JPN) in 18:43.60 (Played by knbnitkr)
(Using system data. NOT from Power-On)
Saga Frontier (Asellus) (JPN) in 43:56 (Played by gure)
(Using system data. NOT from Power-On)
Saga Frontier (Riki) (JPN) in 38:02 (Played by gure)
(Using system data. NOT from Power-On)

I hope you enjoy my run.

Nach: We now have Rules regarding BIOSes, and how to make submissions for runs for emulators that use BIOSes. This run adhears to them. Accepting.

Aktan: Processing.
Spikestuff: Sync Note: In order for this to run on pcsx-rr you must compress the bin/iso to the bz format. And for those figuring out the bios it's SCPH7001.

Post subject: Re: BIOS Issue
sgrunt
He/Him
Emulator Coder, Former player
Joined: 10/28/2007
Posts: 1360
Location: The dark horror in the back of your mind
Nach wrote:
Does this game play on a real system that uses this BIOS? Is the BIOS official?
To the best of my knowledge, yes and yes.
Experienced player (954)
Joined: 12/3/2008
Posts: 936
Location: Castle Keep
Nach wrote:
Does this game play on a real system that uses this BIOS? Is the BIOS official? If the answer is yes to both, I see no reason why we shouldn't allow this run to be published based on the BIOS used.
Because using the 1001 (default one used by ALL our movies) result in different timing, this would be the only reason, else you have to specify in rules you can take ANY bios and its going to be the fuck fest to know what bios is faster than the others, just to whore on few frames Edit: most obviously the answer is yes and yes, if it wasnt, we would not even have this talk anyway
Post subject: Re: BIOS Issue
sgrunt
He/Him
Emulator Coder, Former player
Joined: 10/28/2007
Posts: 1360
Location: The dark horror in the back of your mind
arukAdo wrote:
Because using the 1001 (default one used by ALL our movies) result in different timing, this would be the only reason, else you have to specify in rules you can take ANY bios and its going to be the fuck fest to know what bios is faster than the others, just to whore on few frames
In the future, we should mandate one (I believe it's been brought up on IRC that an exception would be made for this run since there's no official line on the issue at the moment).
Post subject: Re: BIOS Issue
Expert player (2582)
Joined: 6/2/2009
Posts: 1182
Location: Teresópolis - Rio de Janeiro - Brazil
Nach wrote:
Does this game play on a real system that uses this BIOS? Is the BIOS official?
The PlayStation BIOS name is derived from the console model, like the SCPH1001, SCPH7502 etc. There's no PlayStation model (U) (v4.1). My guess is that he is using a normal BIOS with a fancy name.
I am old enough to know better, but not enough to do it.
Post subject: Re: BIOS Issue
sgrunt
He/Him
Emulator Coder, Former player
Joined: 10/28/2007
Posts: 1360
Location: The dark horror in the back of your mind
Dooty wrote:
The PlayStation BIOS name is derived from the console model, like the SCPH1001, SCPH7502 etc. There's no PlayStation model (U) (v4.1). My guess is that he is using a normal BIOS with a fancy name.
SCPH7001, in this case.
Post subject: Re: BIOS Issue
Experienced player (954)
Joined: 12/3/2008
Posts: 936
Location: Castle Keep
sgrunt wrote:
(I believe it's been brought up on IRC that an exception would be made for this run since there's no official line on the issue at the moment).
Yes, and it make sences, accept this one and thereafter set rules lock on 1001 (unless the game need to use a newer bios to operate)
adelikat
He/Him
Emulator Coder, Site Developer, Site Owner, Expert player (3598)
Joined: 11/3/2004
Posts: 4738
Location: Tennessee
why should it be looked to 1001? Why is that one best?
It's hard to look this good. My TAS projects
Expert player (2582)
Joined: 6/2/2009
Posts: 1182
Location: Teresópolis - Rio de Janeiro - Brazil
The difference in those BIOS are as follows: scph1000.bin JAPAN scph5500.bin JAPAN scph1001.bin USA (NTSC) scph7001.bin USA (NTSC) dlth3002.bin UK (PAL) scph7502.bin UK (PAL) so, as long as you are TASing an NTSC game, you should use the SCPH1001 or SCPH7001.
I am old enough to know better, but not enough to do it.
Post subject: Re: BIOS Issue
Publisher
Joined: 4/23/2009
Posts: 1283
Dooty wrote:
The PlayStation BIOS name is derived from the console model, like the SCPH1001, SCPH7502 etc. There's no PlayStation model (U) (v4.1). My guess is that he is using a normal BIOS with a fancy name.
There is that model as said by here: http://en.wikipedia.org/wiki/PlayStation
Expert player (2582)
Joined: 6/2/2009
Posts: 1182
Location: Teresópolis - Rio de Janeiro - Brazil
No, there isn't. all PlayStations (except some rare models) have their names starting with SCPH-something... when someone dumps a BIOS it's usual to name the BIOS with that model's name.
sgrunt wrote:
SCPH7001, in this case
I am old enough to know better, but not enough to do it.
Publisher
Joined: 4/23/2009
Posts: 1283
Dooty wrote:
No, there isn't. all PlayStations (except some rare models) have their names starting with SCPH-something... when someone dumps a BIOS it's usual to name the BIOS with that model's name.
sgrunt wrote:
SCPH7001, in this case
Did you look at the link at all?
Expert player (2582)
Joined: 6/2/2009
Posts: 1182
Location: Teresópolis - Rio de Janeiro - Brazil
Yes, I did. But what I mean is that the name of the BIOS don't matter, you can call it PlayStation 3 Ultimate Bios.bin and it will work exactly as if you call it SCPH1001.bin. He is using the SCPH7001, and I'm 44.5% sure about that! Edit: this is from the link you posted: SCPH-7001 Original (Grey) 4.1 (12/16/97) Rev. C NTSC-U/C. Now I'm 100% sure he is using the SCPH7001! Edit2: this is from my other post: scph1000.bin JAPAN scph5500.bin JAPAN scph1001.bin USA (NTSC) scph7001.bin USA (NTSC) dlth3002.bin UK (PAL) scph7502.bin UK (PAL) so, as long as you are TASing an NTSC game, you should use the SCPH1001 or SCPH7001. I don't know if this happens on emulators too, but I remember playing some PAL games on an NTSC PlayStation (with a modchip), and I couldn't see the bottom of the screen, and the sound was not in sync.
I am old enough to know better, but not enough to do it.
Experienced player (822)
Joined: 11/18/2006
Posts: 2426
Location: Back where I belong
I haven't been a part of the whole bios conversation, and adelikat appears to have already spoken for this run in terms of judging, so I'll just add in my 2 cents and leave it at that: The first half bored me greatly, the second half was pretty awesome. So I guess that averages out to a meh vote.
Living Well Is The Best Revenge My Personal Page
Post subject: Re: BIOS Issue
Emulator Coder
Joined: 3/9/2004
Posts: 4588
Location: In his lab studying psychology to find new ways to torture TASers and forumers
arukAdo wrote:
Nach wrote:
Does this game play on a real system that uses this BIOS? Is the BIOS official? If the answer is yes to both, I see no reason why we shouldn't allow this run to be published based on the BIOS used.
Because using the 1001 (default one used by ALL our movies) result in different timing, this would be the only reason, else you have to specify in rules you can take ANY bios and its going to be the fuck fest to know what bios is faster than the others, just to whore on few frames
This is just like using the Japanese or US version of the game to try to find which which is faster or whatever. In this case it's even less of an issue, because using a different revision of the US BIOS still leaves the game in English.
sgrunt wrote:
In the future, we should mandate one (I believe it's been brought up on IRC that an exception would be made for this run since there's no official line on the issue at the moment).
Why should we mandate one? It's even sillier to mandate one realizing that a particular BIOS will fix/introduce some bugs. Our goal is to show how these games play on real systems sold in stores, when we push them to the limits. Why should we limit ourselves to only one particular model sold in stores? The only thing we need to mandate is that submissions need to specify which country and revision BIOS they used, and not to use any hacked ones, or one which is known not to play the game in question on a real system.
Warning: Opinions expressed by Nach or others in this post do not necessarily reflect the views, opinions, or position of Nach himself on the matter(s) being discussed therein.
Post subject: Movie published
TASVideoAgent
They/Them
Moderator
Joined: 8/3/2004
Posts: 14884
Location: 127.0.0.1
This movie has been published. The posts before this message apply to the submission, and posts after this message apply to the published movie. ---- [1453] PSX SaGa Frontier "Lute" by knbnitkr in 21:08.50
fruitbane
He/Him
Joined: 3/28/2005
Posts: 216
Only 3 fights... Glaghghghghg so much talking... so much flying around by spaceship... The run seems to bypass vast portions of the game, but god it's SOOOOO boring...
Joined: 12/30/2008
Posts: 45
Location: Bubbling nearby...
fruitbane wrote:
Only 3 fights... Glaghghghghg so much talking... so much flying around by spaceship... The run seems to bypass vast portions of the game, but god it's SOOOOO boring...
It's definitely the kind of game that is more enjoyable if you have played/beaten it before. Lute's scenario involve little storyline. It has only one dungeon, which is that last one. Everything else that can be done is optional. But it's obviously better to get various stuff to build your characters up before it... when it's not a TAS, that is. Half of the video is preparation for said dungeon, which is why it's so long and slow. Having beaten the game with all seven characters (and 2nd Division), I liked the run and all the subtleties that someone that has not played the game might not notice. On a sidenote, couldn't Mei-Ling take 3 more damage at the end? ^_^
I lurk, okay?
Joined: 1/10/2010
Posts: 59
I'm glad this finally got published, and it's rather entertaining for those who have played the game, especially for people with a detailed knowledge of it. The only thing I would have liked to see was for the ship/loading screens to be edited out of the encode. Unfortunately, they make up a not insignificant portion of the run and are pretty intrusive.
Joined: 2/12/2010
Posts: 2
Long time lurker. First time poster. I'm interested in the Riki/Asellus runs, but I can't view them without a nico acct. Can anyone help me with a way of viewing these ><
Player (208)
Joined: 7/7/2006
Posts: 798
Location: US
http://otakujapan.seesaa.net/article/71453823.html "How to sign up for nicovideo" I didn't read the instructions, I assume they work.
Joined: 2/12/2010
Posts: 2
Kirkq wrote:
http://otakujapan.seesaa.net/article/71453823.html "How to sign up for nicovideo" I didn't read the instructions, I assume they work.
Thanks! This helped a lot :]
Joined: 9/4/2021
Posts: 45
Location: Japan
I tried encoding this movie for Youtube. Please review. https://mega.nz/file/fOwyhaCS#03qz-kqixV-qkaHDbS8uGmL5f-tAxYAKDReR5RKKt_I
Site Admin, Skilled player (1236)
Joined: 4/17/2010
Posts: 11270
Location: RU
We have a dedicated package that resolves tiny subtitle halo in hires (makes subtitles hard to read on bright background): http://tasvideos.org/EncodingGuide/PublicationManual.html#Downloads_2 Also we use vorbis to encode audio for youtube, not aac. Encoder logo looks a bit empty.
Warning: When making decisions, I try to collect as much data as possible before actually deciding. I try to abstract away and see the principles behind real world events and people's opinions. I try to generalize them and turn into something clear and reusable. I hate depending on unpredictable and having to make lottery guesses. Any problem can be solved by systems thinking and acting.
fsvgm777
She/Her
Senior Publisher, Player (221)
Joined: 5/28/2009
Posts: 1185
Location: Luxembourg
In addition to what feos wrote, I have a few concerns myself:
  • The subtitle placement isn't exactly the best. I'd probably make them 2 parts and put them on the lower left side (and as feos said, make them more readable).
  • The CRF setting (17) is pretty high for something that's intended for YouTube. We usually encode at QP 5 for YouTube.
  • The encode itself isn't cut properly. I'd cut it before the song starts.
  • Speaking of the audio...which SPU plugin did you use, and more importantly, did you use the resync workflow?
  • Finally, at which resolution did you dump the TAS at? A green line at the left can be noticed here. (you may need to download the image to be able to see it)
That's all for now. I will say though that I appreciate you tackling on a TAS done on PCSX, even if it's not up to par yet.
Steam Community page - Cohost profile Oh, I'm just a concerned observer.
Joined: 9/4/2021
Posts: 45
Location: Japan
Encoder logo looks a bit empty.
I'm wondering what to do.
Speaking of the audio...which SPU plugin did you use, and more importantly, did you use the resync workflow?
I used the Eternal SPU plugin. http://pastebin.com/g26ksKNa I used this method. Because desync occurred at the beginning when using pcsx-13f's pcsx.exe.
Finally, at which resolution did you dump the TAS at?
I dumped it at 2880x2160. There's a line at the dumped point that I'll check. It will take time.